1. Installation handle: attach the handle to the right side of the binding machine (note: the Angle of the handle), tighten the screw with the locking screw.

2. Paper quantity: it is necessary to determine the amount of paper according to the specifications of each model. Otherwise, it may lead to the following undesirable situations:

The handle is pressed down, and the paper barrier can't penetrate.

The edge distance is not balanced, and it is easy to produce edge roll Angle.

It causes the distortion of the square shaft, resulting in shortening service life of the binding machine.

3. Adjust the margins of the paper. The principle is: determine the margin size according to the diameter of the drawing circle.

The method is: adjust the scale to achieve the edge distance by adjusting the screw (after the binding machine).

The rule is: the pull ring diameter is large, the paper edge is raised, the ring diameter is small, the paper margin is small.

4. Drilling operation method:

The paper is arranged neatly, close to the location block, parallel to the paper into the machine, the top is in place.

Hold the paper in your left hand, hold the handle in your right hand, press down to the blade to cut through the paper, and lift the handle.

Keep your hands steady and take out the paper. If there is a paper hanging, repeat the handle, then you can take out the paper. Note: this article is collected and collated by My12345.

5. Pull ring binding method:

According to the paper number, choose different specifications to the size of the circle, push the handle slowly up to pull open circle, and then insert the paper hole circle, will handle back slowly, let all pull ring gear into paper hole, pull handle, tightening ring mouth, binding already installed.

Many customers do not know from what aspects to judge the advantages and disadvantages of a binding machine in the purchase and binding machine, and it is impossible to deal with the different types of binding machines. Here are some parameters that must be considered when purchasing a binding machine: